25.4mm228.6mm254mm Aluminium Couleur Acier En Bois Échelle Tirer La Poignée Décalée Avec Des Kits De Boîtier Personnalisé En Acier Inoxydable Sans Cadre Accessoires De Porte Poignée De Salle De Douche Pour Iinterior Doors Poignée De Porte Coulissante En Verre Appliquer Pour 6-12mm Porte En Verre
Instructions d'installation 1. Préparation de l'outil The tools that need to be prepared first are screwdrivers, screws, and pens (for marking) 2. Faites une marque First, lay the glass door flat, mark the place where the handle of the glass door is to be installed in advance, and use an electric switch to install a diamond drill bit of the corresponding specification to make holes with water. At this time, you must pay attention to prevent the glass from breaking. If it is not tempered glass, use a 10mm glass drill to measure the hole distance of the handle (center to center) and mark it on the glass. 3. Jouez à la colle à verre Then, apply a little glass glue to the part where the handle is inserted into the glass. When the handle is assembled, its root is close to the glass, and then press the fixing screw to ensure that the handle is not loose. 4. Dévissez la vis Then, when installing the handle, start from the outside, and screw the long screw of the handle inside. Do not leave the screw of the handle outside, so that the handle can be removed from the outside. The connecting part of the handle should not be too tight when inserted into the hole, and should be slightly loose. . If the insertion is too loose, wrap the insertion part with soft tape |
http://fr.pullhandlefactory.com/